Job description Electrical Instrumentation Telecom

• Hold a B.Sc. Degree/Diploma or an approved equivalent degree in Electrical/Instrumentation Engineering. Shall possess Ex01 to Ex04 training certification asminimum from COMPEX, ATEC approved training or equivalent.
• Min. 10 Yrs. of experience in Electrical, Instrumentation & TelecommunicationInspection field in the Oil & Gas industry.
• Must be experienced in interpreting and applying EPC Contractor and Vendor design documentation in the construction, testing and commissioning of all Electrical/instrumentation and control systems in Offshore/Onshore Oil and gas new construction large projects. E.g., GTGs, Transformer DC and AC power distribution, Switchgears, control gear, cathodic protection, DC UPS, Fire-Gas and associated Systems.
• Familiarity with works related to Electrical & Instrumental works i.e. cable termination, I/O checks, and simulation checks. Formal qualification for work activities associated with LV/HV Equipment, 6.6KV and 11KV.
• Proven working experience including liaising with EPC Contractors, Manufacturers and Client representatives during the FAT and SAT of electrical and Instrumentation equipment/Systems.
• Fully Conversant with the international codes and STDs ASME, API, DNV, BS & ISO. However, the familiarity with ADNOC and the Company Technical STD is advantage. Computer literate, and very good knowledge of spoken and written English language including writing of technical reports/procedures and QA/QC documentation.
• Typical roles & responsibilities of shall not be limited to the following:Project Overseeing E&I works, Quality control and inspection of electrical andinstrument materials received at store/site.
• Prepare/Review related procedures, method statements and ITPs in coordination with QA/QC Engineers and Project Engineers.
• Check all drawings and documents used at site for approval status and compliance with the project requirements.
• Inspections of electrical and instrument installations activities. Prepare/Review QA/QC reports regarding inspections, material and nonconformance issues.
• Verify all necessary corrective actions are carried out.
• Ensure all equipment and special tools are available and suitably calibrated with valid certificates.
• Functional test of control valves, SDV and ESDV’s.
• Attendance at FAT and SAT of all primary PLC, control and Fire and Gas systems.
• Approving and document control of all related inspection records.
• Issuance inspection daily, weekly and monthly concise inspection reports.

• Bachelors Degree in Electrical & Instrumentation
• Minimum 10 years of relevant experience in Electrical, Instrumentatiion
• Preferred T-BOSIET certificate, not mandatory
• Previous construction experience within the oil and gas industry
• Previous exposure to high voltage electrical installation including switchgear and electric drives.
• A working knowledge of BS/IEC/ISA/NFPA/IEEE/ISO/API/ATEX/IECEx codes and standards relating to electrical and instrumentation work

Roles and Responsibilities

• Review and approval of Method statements and procedures.
• Installation and testing of Cathodic protection system.
• Calibration of Instruments, Control valves, MOV
• Installation of instruments, JBs, Marshalling cabinets, PLC, DCS.
• Cable laying ,cable identification and Performs tests of continuity, insulation resistance.
• Performs visual inspections, dimensional test, checks rating and material for connection and Performs all relevant loop checks.
• Preparation of AS BUILT DRAWINGS according to the client’s scope.
• Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system, Earthing system, Skids, Fire & Gas system, PAGA system.
• Checks telephone system & witness testing for fibre optic cable.
• Coordinating with vendors like ICSS vendor, Switch gear vendors.
• Responsible for all interface activities which is related with other simultaneous projects happening and inter discipline coordination.
• Responsible for carrying out FAT and SAT actvities.
• Familiar with all start up activities like pre commissioning, functional check and relevant commissioning activities.

Roles and Responsibilities:

• He had basic knowledge in ASME SECTION V (Nondestructive Examination) & acceptance criteria of applicable CODE.
• Responsible for daily NDT inspection activities
• Responsible for NDT plan or NDT matrix submission
• He must work as an interface between ndt technician and clients.
• A daily inspection log shall be maintained and monitor the activities.
• He has to ensure that daily NDT reports are updated in system and signed reports are compiling on sequence order.
• Responsible for ensuring the calibration of NDT equipments.
• Responsible for ensuring the expiry dates of NDT consumables.
• Responsible for maintaining updated NDT request & status.
• Responsible for circulating the daily NDT status to project management team.
• If any repair, RCA shall be prepared and submitted to PMT/CONTRACTOR/COMPANY.
• If any repair, responsible for conducting toolbox concern team.

---

Minimum Requirements:

• Engineering Diploma or Engineering Degree or equivalent.
• Minimum 6 years and above’ experience with recorded details
• ASNT LEVEL II (RT, UT,MPI,DPT & VT) or equivalent as Minimum. Familiar with Construction codes
• ASME B 31.3, ASME B 31.1, ASME Sec V, ASME Sec VIII, ASME B 31.4, API 1104, AWS D1.1 etc

Job Summary:

We are looking for an experienced and technically skilled Scaffolding Engineer to support our ADNOC site operations in Abu Dhabi. The ideal candidate will have in-depth knowledge of scaffolding design, structural analysis, and compliance with ADNOC and international safety standards.

---

Key Responsibilities:

• Design and develop scaffolding layouts and AutoCAD drawings for safe access and working platforms based on site requirements.
• Perform structural calculations independently to ensure the stability and safety of scaffolding installations.
• Conduct STAAD analysis to perform adequacy checks on existing structures supporting scaffolding systems.
• Ensure all scaffolding designs comply with ADNOC standards, project specifications, and applicable safety regulations.
• Prepare scaffolding design documentation, load calculations, and method statements for construction team use.
• Collaborate with site teams, contractors, and safety officers to ensure correct implementation of scaffold systems.
• Provide technical guidance and resolve issues related to complex scaffold configurations or load-bearing concerns.

---

Qualifications & Skills:

• Minimum 5 years’ experience in scaffolding design engineering within the Oil & Gas industry.
• CISRS certification – Scaffolding Supervisor or Advanced Inspector is mandatory.
• Proficient in AutoCAD for detailed scaffold design and drafting.
• Strong capability in STAAD software for structural analysis and validation.
• Familiarity with ADNOC standards and site-specific safety procedures.
• Excellent analytical, problem-solving, and communication skills.
• Bachelor’s degree in Civil, Structural Engineering, or related discipline preferred.

---

Benefits:

• Free Food, Accommodation, and Transportation (FAT) provided at site.
• Opportunity to work on high-profile ADNOC projects.
• Competitive salary and career development within a reputable EPC company.

Job Summary:

We are seeking a proactive and detail-oriented PTW Coordinator to join our team for an ADNOC project in Abu Dhabi. The successful candidate will be responsible for managing the Permit to Work (PTW) system, ensuring compliance with ADNOC safety standards, and facilitating safe work practices on-site.

---

Key Responsibilities:

• Operate and manage the eWMS mobility device to issue, track, and close work permits.
• Ensure all Job Performers (JPs) are adequately trained and competent in using eWMS devices.
• Perform daily site inspections using the mobile eWMS system to ensure job compliance and permit validity.
• Lead the preparation and review of Field Risk Assessments (FRA) and Job Safety Analyses (JSA) in coordination with COMPANY and CONTRACTOR representatives.
• Facilitate and document SIMOPS (Simultaneous Operations) meetings with COMPANY, CONTRACTORS, and Sub-contractors.
• Administer work permits in various roles including Job Performer, Performing Authority, Area Authority, and Permit Issuer to ensure safe work execution.
• Collect, review, and submit JP documents to COMPANY/CONTRACTOR for necessary approvals and validation.

---

Qualifications & Skills:

• Minimum 2–3 years’ experience in a similar role within the Oil & Gas or EPC industry.
• Hands-on experience with eWMS (electronic Work Management System) is mandatory.
• Strong knowledge of ADNOC safety standards, permit systems, and HSE compliance.
• Good communication and coordination skills with multiple stakeholders.
• Ability to lead safety-related discussions and enforce PTW protocols.
• Relevant HSE certification or permit coordination training preferred.

---

Benefits:

• Free Food, Accommodation, and Transportation (FAT) provided at site.
• Opportunity to work on prestigious ADNOC projects.
• Collaborative and safety-focused work environment.

Minimum Job Requirement:

• Bachelor’s degree in Mechanical engineering, Civil Engineering, or relevant discipline.
• Minimum 15 years of QA/QC experience in oil and gas construction (EPC or Projects related to Oil and Gas field). Experience in Auditing activities as a lead Auditor.
• Familiarity with ASME, API, ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, QMS, and relevant construction codes and standards.
• Knowledge of site construction processes, welding, materials, NDE methods (RT, UT, PT, MT), hydrotesting, Electrical & Instrumentation, GRE, Civil etc.

Roles and Responsibilities :

• To ensure effective implementation of the Quality Management System (QMS) and project-specific quality requirements in oil and gas construction projects, ensuring all civil, mechanical, piping, structural, electrical, and instrumentation construction activities meet client, regulatory, and code requirements.
• Implement and maintain project Quality Plans and Inspection & Test Plans (ITPs) specific to oil and gas construction activities.
• Prepare Quality Manuals, System Procedures, Quality Objectives, KPI’s
• Good interpersonal skills to coordinate with construction teams, clients, subcontractors, and third-party inspectors.
• Perform surveillance on site construction activities, including civil works (foundations, trenches), mechanical (piping, equipment erection), structural steel erection, and E&I installations to ensure compliance with approved procedures and project specifications.
• Conduct internal audits to verify compliance with project and ISO 9001 QMS requirements on Projects
• Monitor and analysis Non-conformances, Quality Observations etc.
• Coordinate with client representatives and third-party inspectors for activities related to internal /external and client audits.
• Participate in the preparation and review of project-specific construction quality procedures, method statements, and ITPs.
• Control and manage non-conformities (NCRs) raised during construction activities, ensuring timely logging, tracking, and closure.
• Participate in root cause analysis for site quality issues and implement effective corrective and preventive actions.
• Conduct Tool box talks/Trainings related to QMS requirements.
• Ensure that construction activities adhere to client specifications, project drawings, ASME/API standards, and applicable statutory requirements.
• Support quality awareness programs for site supervisors, construction crews, and subcontractors to maintain a quality-focused culture at the construction site.
• Ensure calibration of inspection, measuring, and test equipment before use on site.
• Experience in managing non-conformities, conducting root cause analysis, and implementing corrective and preventive actions in construction environments.
• Strong documentation and report writing skills
• Ability to interpret construction drawings, P&IDs, isometrics, and project specifications.

Educational Qualifications:

• Bachelor’s Degree (BE/B.Tech) in Mechanical Engineering, or
• Diploma in Mechanical Engineering with strong industry experience.

Experience: Minimum 8 years of relevant experience in Oil & Gas construction companies as an Estimation Engineer or Proposal Engineer.

Key Responsibilities:

• Review enquiry/tender documents received from clients and ensure their completeness.
• Participate in bid initiation, review meetings, and tender strategy discussions.
• Prepare cost estimates for:
• Piping fabrication and erection
• Structural steel erection
• Equipment erection in oil & gas projects (onshore)
• Raise timely technical and commercial clarifications to ensure accurate bid submissions.
• Coordinate internally for bid preparation, including inputs from subcontractors, vendors, and internal departments.
• Demonstrate clear understanding of scope of work and develop practical, execution-based estimates.
• Prepare detailed cost estimations and compile technical proposals as per tender requirements.
• Perform construction take-offs and estimate man-hours per activity for accurate costing.
• Estimate costs for:
• Piping spool fabrication
• Piping and equipment erection
• Steel structure installation
• Develop technical and commercial proposals for submission to EPC contractors and clients.
• Proficient in Microsoft Excel for quantity take-offs, costing, and budget analysis.
• Develop Material Take-Offs (MTOs), bulk quantity assessments, and verify against P&IDs, isometrics, and general arrangement drawings.

Required Competencies:

• Strong analytical and numerical skills.
• Excellent coordination and communication abilities.
• In-depth knowledge of construction methods, cost structures, and labor productivity norms.
• Ability to work under pressure and meet tight deadlines.
• Familiarity with UAE-based Oil & Gas market and practices is preferred.

Job Description :

Project Planning & Scheduling:

• Develop and maintain comprehensive project schedules using tools like Primavera P6.
• Perform critical path analysis and resource levelling to ensure timely project delivery.
• Monitor project progress and prepare detailed reports highlighting deviations and proposing corrective.

Cost Control & Budget Management:

• Establish and manage project budgets, ensuring accurate tracking and forecasting.
• Conduct cost variance analyses and implement measures to maintain budget adherence.
• Coordinate with procurement and finance teams to align expenditures with project milestones.

Project Setup & Controls Implementation:

• Collaborate with project management and document control teams to establish effective project control systems.
• Define and implement project control processes, tools, and procedures in line with company standards.

Reporting & Stakeholder Communication:

• Prepare and present regular project status reports to stakeholders, including progress, cost, and schedule updates.
• Facilitate communication between project teams, contractors, and clients to ensure alignment on project.

Qualifications & Skills:

• Education: Bachelor’s degree in Mechanical Engineering, or a related field.

Experience:

• 6–7 years of experience in project controls within the oil and gas industry, with a focus on offshore and onshore projects.
• Proven experience in EPC (Engineering, Procurement, and Construction) phases.
• Prior involvement in ADNOC projects or major oil and gas projects in the Middle East is highly desirable.

Technical Skills:

• Proficiency in project control software such as Primavera P6.
• Strong understanding of cost control methodologies and project scheduling techniques.
• Familiarity with industry standards and regulatory requirements in the Middle East.

Preferred Attributes:

• Experience with ADNOC-specific requirements and standards.
• Background with reputed EPC contractors operating in the Middle East.
• Familiarity with International regulatory standards and project execution practices.

Job Summary:

We are seeking a qualified and detail-oriented Planning Engineer to support project scheduling, progress monitoring, and planning control for ongoing EPC Oil & Gas construction projects. The candidate must have strong knowledge of civil engineering construction methodologies, along with expertise in project planning tools such as Primavera P6.

Key Responsibilities:

Project Planning & Scheduling:

• Develop and maintain detailed project schedules for civil and structural works using Primavera P6.
• Coordinate with project managers, site engineers, and other disciplines to gather input for schedule development.
• Prepare baseline schedules, updates, look-ahead plans, and recovery schedules as needed.

Progress Monitoring & Reporting:

• Monitor project progress against the approved schedule; identify delays and deviations, and recommend corrective actions.
• Prepare weekly and monthly progress reports, S-curves, histograms, and project dashboards for internal and client review.
• Track productivity, resources, and manpower to ensure alignment with project timelines.

Coordination & Communication:

• Liaise with construction, procurement, and engineering teams to ensure timely delivery of materials, drawings, and approvals.
• Participate in client and contractor meetings to present schedule updates and progress status.

Delay Analysis & Claims Support:

• Perform delay analysis and provide technical support in the preparation of extension of time (EOT) claims.
• Maintain proper documentation to support planning and contractual submissions.

Project Controls & Compliance:

• Ensure project planning is in compliance with company procedures, contractual obligations, and HSE standards.
• Integrate project risk analysis into the planning and control process.
• Listing out the preliminary and final MTO required for the Project.
• Track project costs and invoicing linked to individual activities to ensure proper financial control and accountability.

Qualifications & Experience:

• Bachelor’s degree in engineering Background or equivalent.
• Minimum 8 years of relevant experience in project planning, with at least 4 years in EPC Oil & Gas construction projects.
• Strong understanding of civil construction methods, sequences, and industry best practices.

Technical Skills Required:

• Proficiency in Primavera P6 and MS Project
• Familiarity with project controls software (Excel, Power BI, or similar tools)
• Knowledge of standard planning methodologies (WBS, Critical Path Method, Earned Value Management)
• Exposure to construction contract terms (FIDIC preferred)

Job description

We are seeking a highly experienced Project Manager with a strong background in Oil & Gas EPC projects (Engineering, Procurement & Construction) covering both onshore and offshore scopes. The successful candidate will be responsible for leading complex projects from initiation to completion, ensuring delivery within scope, schedule, and budget, while maintaining the highest standards of safety and quality.

Key Responsibilities:

• Lead and manage the full lifecycle of EPC projects, including engineering, procurement, construction, commissioning, and close-out.
• Oversee project execution and construction activities for both onshore and offshore operations.
• Coordinate with engineering teams, procurement, subcontractors, and clients to ensure project alignment and progress.
• Manage project schedules, budgets, resources, and deliverables with a strong focus on risk mitigation and value engineering.
• Ensure compliance with ADNOC standards, HSE policies, and regulatory requirements.
• Maintain proactive communication with stakeholders and provide regular project updates and reports to senior management.
• Lead multi-disciplinary teams and provide clear direction to achieve project objectives and client satisfaction.
• Identify and resolve project-related issues and bottlenecks efficiently.

Requirements:

• Bachelor’s degree in Mechanical Engineering or relevant discipline.
• Minimum 12 years of experience and 5 years in managing large-scale EPC projects in the Oil & Gas sector in GCC or Middle east countries.
• Strong background in onshore and offshore construction and commissioning.
• Proven success in managing ADNOC or similar client projects in the UAE or GCC.
• Excellent leadership, planning, and organizational skills.
• PMP certification or equivalent is an advantage.
• Proficient in project management tools such as Primavera P6, MS Project, and ERP systems.
• Any Nationality

Job Summary:

We are seeking an experienced and result-driven Business Development Manager to lead strategic initiatives, identify new business opportunities, and foster strong client relationships in the Oil & Gas sector. The ideal candidate will possess a strong background in EPC or Oil & Gas construction, with a deep understanding of the Abu Dhabi and broader UAE market dynamics.

Key Responsibilities:

• Market Analysis & Strategy:

Conduct detailed market research to identify potential clients, partners, and projects in the EPC projects across oil & gas, energy, utilities, and industrial sectors.

Develop and execute business development strategies aligned with the company’s long-term goals.

• Client Relationship Management:

Build, maintain, and expand strong relationships with key stakeholders, including ADNOC Group, EPC companies, consultants, and government entities.

Act as the primary point of contact for key clients and partners.

• Tendering & Proposals:

Identify tender opportunities, lead the pre-qualification and bid submission process in coordination with the proposals and estimation teams.

Oversee preparation of commercial and technical proposals in alignment with client requirements.

• Networking & Representation:

Represent the company at industry events, exhibitions, conferences, and forums to enhance visibility and branding.

Leverage existing network to open doors for new business opportunities.

• Collaboration with Internal Teams:

Work closely with engineering, operations, legal, and finance teams to align business development efforts with operational capacity and project feasibility.

Provide market intelligence and insights to support project planning and strategic decision-making.

• Performance Monitoring & Reporting:

Set business development targets and KPIs; track and report on performance metrics.

Present regular updates to senior management on pipeline, prospects, wins/losses, and competitor activities.

Qualifications & Experience:

• Bachelor’s degree in Engineering, Business Administration, or related field (Master’s degree is a plus).
• Minimum of 10 years of experience in business development roles within EPC or Oil & Gas Construction companies.
• Proven track record of winning large-scale Oil & Gas projects in the UAE, preferably with ADNOC or other major operators.
• Strong network and understanding of the Abu Dhabi market and regulatory environment.
• Excellent communication, negotiation, and presentation skills.
• Ability to manage multiple stakeholders and work under pressure to meet targets.

Preferred Skills:

• Knowledge of EPC, and turnkey project life cycles.
• Familiarity with ADNOC procurement systems and prequalification processes.
• Strong commercial and contractual acumen.

Key Responsibilities for PCM:

• Lead the development and implementation of project control systems, processes, and tools.
• Prepare and maintain detailed project schedules using Primavera P6, ensuring alignment with project milestones and deliverables.
• Monitor project costs, track variances, and ensure adherence to budgets and forecasts.
• Conduct risk assessments and implement risk mitigation strategies throughout the project lifecycle.
• Generate accurate and timely reports on project performance, including schedule and cost trends, earned value, and forecasts.
• Support project teams with data-driven insights for effective decision-making.
• Ensure compliance with ADNOC standards and reporting formats where applicable.
• Coordinate with project managers, engineers, procurement, and finance teams to ensure cohesive project execution.

Minimum Requirements:

• Bachelor’s degree in Engineering, Project Management, or a related field.
• Minimum 12 years of experience in project controls & planning within the Oil & Gas construction industry.
• Strong expertise in Primavera P6, MS Excel, cost control systems, and risk analysis tools.
• Proven experience in both onshore and offshore EPC environments.
• ADNOC project or GCC experience is highly desirable.
• Strong analytical, organizational, and communication skills.
• Familiarity with earned value management (EVM) and project performance metrics.
• PMP or CCP certification is a plus